g) Track may have two programs, other than opening night, where a draw - redraw system may be used for lineup.
14. POINTS SCHEDULE
a) Weekly “A” feature is 40 points, with each subsequent position worth one point less. This makes the 24th spot in the feature worth 17 points. If 24 or more cars start in the feature, all positions from 24th on back receive 17 points. When a “B” feature is ran, the first non - transferring driver receives 16 points and each subsequent position, back to sixth spot, receives one less point per position. Sixth and position on back in the “B” feature receives 11 points. This applies to all “B” feature if more than one are run per night.
b) Drivers must compete in heat race or feature to receive minimum 11 points - no show - up points. Should a driver qualify for a “B” feature or the “A” feature, and not be able to make the field due to mechanical or other difficulties, driver will be scored in last position of the race qualified for, and receive points accordingly.
c) Vacated position will be filled in by the next qualified driver.
d) All cars will receive minimum points unless disqualified by technical violations or driving violations. If disqualified by technical violations no points are earned for the entire meet, if for driving violation, no points are earned for that heat or main.
e) Points will be awarded to driver not car number in IMCA classes. All other classes, points will go to car number. Minimum 8 race events must be attended, to be eligible for year end awards.
f) Atomic Motor Raceway reserves the right to require certain decals to be run on the right front fender of the car to be eligible for certain purse monies. Only registered cars will participate in these funds. These decals and amounts will be disclosed as available.
MARTHAS MINI - STOCKS
Note: All general and safety rules apply in all cases. Some rules in this class may be more stringent than the general or safety rules, In this event the stringent rule will apply. See safety rules pages 6-7.
1. ELIGIBLE CARS: Two wheel drive four cylinder cars or pickups only. Maximum 106 inch wheel base. Minimum weight 2300 lbs with driver.
2. ENGINE: Stock to car used not to exceed 2600 cc.
a) BLOCK: must be stock, may deck block .010 to clean surface. Block may be bored .060.
b) CRANKSHAFT: Stock crank and rods must be used. May be balanced for engine life.
c) HEADS: Must be factory stock no porting or polishing may be surfaced .010 for cleaning and straightening.
d) CAMSHAFTS-VALVETRAIN: Stock to engine used. Engine must remain in stock location.
3. RADIATOR: Radiators of any style may be used but must be mounted in stock location.
4. CARBURETOR: Only one two barrel carb, 500 cfm max allowed.
5. INTAKE MANIFOLD: Stock only no porting, polishing or modifications of any type allowed.
6. EXHAUST: Headers allowed .No porting, polishing or modifications of any type allowed. Single 2 ½ inch maximum tail pipe allowed. Must exit behind driver.