Page 18
15. Tire size to be no more than 10 inches wide. Center of bumper must be 2 to 6 inchs above racing surface. Recommend bumper to extend to outer edge of tire.
Safety Equipment
1. 5 point harness required, 3 year date stamp recommended.
2. Driver must have neck brace.
3. SA2000 helmet or equivalent required. Must have face shield or goggles.
4. Roll bar around driver must be padded.
5. Racing approved wrist restraints are required and must be sufficient to keep arms and hands inside the cage of the kart.
6. Racing suit required. Fire suit and fire proof gloves highly recommended. You are ultimately responsible for you and your child’s safety.
Beginner Class
1. Drivers must be five years old, any exceptions must be approved by the promoter and officials prior to race day.
2. Engine must be stock, 6.5hp max horsepower, no blue printing. Absolutely no modification other than removing the governor. No racing engines. No exceptions!
3. A restrictor plate (.425 opening) may be installed between carb and block. Track promoter will sale and control restrictor plates.
4. Pump gas only. No additives.
5. Muffler has to be stock to model of engine. No hollowing out muffler. No headers.
6. Carbs are stock to model of engine. No slide carbs,
7. Stock ignition only. No timing adjustments allowed.
8. Stock cast iron flywheel only. No cutting or drilling on fly wheel.
9. No wings allowed.
10. Minimum weight 260lbs with driver.
INTERMEDIATE CLASS
1. Driver must be five years old, any exceptions must be approved by the promoter and the officials prior to race day.
2. Engine must be stock, 6.5 max horsepower, no blue printing. Absolutely no modifications other than removing the governor. No racing engines. No exceptions!
3. Pump gas only. No additives
4. Headers or pipes are allowed. Maximum length 24 inches, must conform to profile of Kart.
5. Carbs are stock to model of engine. No slide carbs.
6. Stock ignition only. No timing adjustments allowed.
7. Stock cast iron flywheel only. No cutting or drilling on flywheel.
8. Plastic cam on briggs intec 6.5hp ohv engine may be changed to a steel cam using part # br694831 and valve springs part # br26826.
9. Minimum weight 290lbs with driver.